Determining Fire Door Resistance Through Infrared Thermography

Authors

  • Mustafa ALTIN

DOI:

Keywords:

Thermal camera, image proses, fire doors, fire safety

Abstract

The resistance tests of two fire doors with standard opening single were made using the methods of thermocouples and infrared thermography according to the features stated in the regulations. With the traditional fire mechanism stated in the regulation of TS EN 1634-1, a fire resistance test of 50 and 56 minutes was made. In the 32nd and 34th minutes of the experiment, opening was observed at the upper right-hand corners of standard opening single fire doors that were tested. Temperature values obtained from the measurement points stated in the regulation were controlled and with 200 thermal images that were obtained image process were applied. The utility of Infrared Thermography (IRT) method that is a contactless and distant measurement technique of temperature is shown to be used for fire tests with the traditional methods.

Downloads

Download data is not yet available.

References

J. A. Capote, D. Alvear e.g.. “Assessment of Physical Phenomena Associated to Fire Doors During Standard”, Tests Fire Technology, 2012, DOI: 10.1007/s10694-012- 0270-0

Bennetts I.D., Moinuddin K.A.M., Gohy C.C. and Thomas I.R., “Testing and factors relevant to the evaluation of the structural adequacy of steel members within fire-resistant elevator shafts”, Fire Safety Journal 40 (2005) 698–727

Kılıç A.,http://www.yangin.org/dosyalar/yangin_kapilari. pdf

Barreira, E. and De Freitas, V.P., (2007). “Evaluation of building materials using infrared thermography”, Construction and Building Materials"; 21; 218–224.

Selek, M., Sahin, Ö.S., Kahramanlı, S., 2009. “Using artificial neural networks for realtime observation of the endurance state of a steel specimen under loading”, Expert Systems with Applications 36-4, 7400-7408. 95 | IJAMEC, 2016, 4(4), 92-95 This journal is © Advanced Technology & Science 2013

Wirahadikusumah, R., Abraham, D.M., Iseley, T., and Prasath, R.K., (1998), “Assessment technologies for sewer system rehabilitation”, Automation in Construction; 7: 259– 70.

Moropoulou, A., Koui, M., and Avdelidis, N.P., (2000), “Infrared thermography as an NDT tool in the evaluation of materials and techniques for the protection of historic monuments. Insight “, Non-Destructive Test Condition Monitoring; 42(6):379–83.

Grinzato, E., Vavilov, V., and Kauppinen, T., (1998), “Quantitative infrared thermography in buildings”, Energy Buildings; 29: 1–9.

Titman, D.J., (2001), “Applications of thermography in non-destructive testing of structures”, NDT and E International; 34: 149–54.

Altın, M. Selek, M. ve Taşdemir, Ş. ”An Analysis of Thermal Behavior of Masonry Construction Brick Under Pressure Using Infrared Thermograph Technique”, eJournal of New World Sciences Academy, 2011, Volume: 6, Number: 3, Article Number: 1A0191

Altın Mustafa “Determining behaviors of fire doors with thermal camera and traditional methods comparatively”, Energy Education Science and Technology Part A: Energy Science and Research, (Spec .Iss.1) pp. 465-474.

TS EN 1634-1 (2010), “Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware - Part 1: Fire resistance tests for doors, shutters and openable windows”, Turkish Standard, Ankara.

Downloads

Published

16-12-2016

Issue

Section

Research Articles

How to Cite

[1]
“Determining Fire Door Resistance Through Infrared Thermography”, J. Appl. Methods Electron. Comput., vol. 4, no. 4, pp. 92–95, Dec. 2016, Accessed: Oct. 07, 2024. [Online]. Available: http://ijamec.org/index.php/ijamec/article/view/127

Similar Articles

1-10 of 66

You may also start an advanced similarity search for this article.