Login or Register to make a submission.

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
  • This manuscript describes original work, it has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  • All Authors approved the manuscript and this submission.
  • The submission file is in Microsoft Word document file format.
  • Citation in text: every reference cited in the text is also present in the reference list.
  • References are written according to the instruction above.
    Where available, URLs for internet file references have been provided.

Author Guidelines


Template of the manuscript can be downloaded from the following link:

Manuscript Template (.docx)

Copyright form of the manuscript can be downloaded from the following link:

Copyright Form

ORCID information of all authors included in the article should be added correctly in the relevant field in the template during the article upload. Articles that do not meet this requirement will not be evaluated.

Authors without an ORCID number can use the link below to get one.

Cover Letter
All submissions should include a cover letter as a separate file.A cover letter should contain a brief explanation of what was previously known, the conceptual advancement with the findings and its significance to broad readership. The cover letter is confidential and will be read only by the editors. It will not be seen by reviewers.

Similarity Report

Studies submitted to the IJAMEC should be scanned with programs such as "iThenticate" or "Turnitin", including the references section. Articles with a similarity rate of more than 20% are rejected. In such cases, the author/s are asked to revise and upload the article. Only articles with a similarity rate of 20% or below are taken to the double-blind review evaluation process. Similarity report to be taken from the relevant programs should be uploaded to the journal system in PDF format along with the article (as an additional file).

Ethics Committee Report & Declaration

For the carried out studies, the permit or ethical declaration form obtained from the relevant institutions and organizations regarding the data, information and documents within the frame of academic and ethical rules must be uploaded to the system (as an additional file).

Preparation of Manuscript

Author(s) should use these specific styles for each part (for example title, abstract, keyword etc.) of the manuscript. The detailed information about these styles can be found in the template file.

Research articles are usually 7 to 16 pages long. In special cases, shorter or longer articles may be accepted. There is not any page limit in IJAMEC.

The language of the journal is English. Any other languages are not accepted for publication.

Author(s) should provide English versions of the title, abstract and keywords.

Abstract section of the manuscript should be between 100 and 300 words.

Paragraphs should not start with indentation.


The full name(s) of the author(s) should be given. In addition the e-mail address(es), affiliation(s), and ORCID's of all author’s should be provided. The telephone number of the corresponding author should be written.

Keywords should start with a bold “Keywords” title and should not exceed six keywords. Each keyword should be separated with comma symbol.

The citations should be given in IEEE Style. Authors can get help from citation management applications/tools when preparing their papers. The title of the citations section should be “References”.

In text citations should be written in square brackets like [1], [3-5] etc.

Equations should be aligned centered. Equation number should be written inside parenthesis and placed to the right side of the equation, aligned right in the page. Equations should be cited with their full name like “As seen in Equation 1” or like “As seen in Equations 3 and 4”.

Tables should be centered in the page. Table number and caption should be written above the table. Tables should be cited with their full name like “As seen in Table 1” or like “As seen in Tables 3 and 4”.

Figures should be centered in the page. Figure number and caption should be written below the figure. They should be cited with their full name like “As seen in Figure 1” or like “As seen in Figures 3 and 4”.

The following examples are taken from the guideline “IEEE Reference Guide” by IEEE Periodicals Transactions/Journals Department 445 Hoes Lane Piscataway, NJ 08854 USA. The detailed guide is given in here.


Basic Format:
J. K. Author, “Title of chapter in the book,” in Title of His Published Book, xth ed. City of Publisher, (only U.S. State), Country: Abbrev. of Publisher, year, ch. x, sec. x, pp. xxx–xxx.
B. Klaus and P. Horn, Robot Vision. Cambridge, MA, USA: MIT Press, 1986.
L. Stein, “Random patterns,” in Computers and You, J. S. Brake, Ed. New York, NY, USA: Wiley, 1994, pp. 55–70. 
The Terahertz Wave eBook. ZOmega Terahertz Corp., 2014. [Online]. Available: Accessed: May 19, 2014.


Conference Paper (Paper Presented at a Conference)
Basic Format:
J. K. Author, “Title of paper,” presented at the Abbreviated Name of Conf., City of Conf., Abbrev. State, Country, Month and day(s), year, Paper number.
D. Caratelli, M. C. Viganó, G. Toso, and P. Angeletti, “Analytical placement technique for sparse arrays,” presented at the 32nd ESA Antenna Workshop, Noordwijk, The Netherlands, Oct. 5–8, 2010.
J. G. Kreifeldt, “An analysis of surface-detected EMG as an amplitude-modulated noise,” presented at the 1989Int. Conf. Medicine and Biological Engineering, Chicago, IL, USA, Nov. 9–12, 1989. 
G. Veruggio, “The EURON roboethics roadmap,” in Proc. Humanoids ’06: 6th IEEE-RAS Int. Conf. Humanoid Robots, 2006, pp. 612–617, doi: 10.1109/ICHR.2006.321337.


Conference Proceedings With Series Title, Volume Title, and Edition
Basic Format:

J. K. Author, “Title of paper,” in Abbreviated Name of Conf. in Volume Title, in Series Title, ed., year, pp. xxxxxx.
A. Amador-Perez and R. A. Rodriguez-Solis, “Analysis of a CPW-fed annular slot ring antenna using DOE,” in Proc. IEEE Antennas Propag. Soc. Int. Symp., in Slot Ring Antennas II, vol. 3, 2nd ed., Jul. 2006, pp. 4301–4304.

Basic Format:
Author, “Title.” (Date, Year). Distributed by Publisher/Distributor. (or if DOI is used, end with a period)
S. Ansolabehere, M. Palmer, and A. Lee. “Precinct-level election data. V1.” January 20, 2014. Distributed by Harvard Election Data Archive. UNF:5:5C9UfGjdLy2ONVPtgr45qA==


Basic Format:

J. K. Author (or Abbrev. Name of Co., City of Co. Abbrev. State, Country). Name of Manual/Handbook, x ed. (year). Accessed: Date. [Online]. Available:
L. Breimann. Manual on Setting Up, Using, and Understanding Random Forests v4.0. (2003). Accessed: Apr. 16, 2014. [Online]. Available:


Basic Format:

J. K. Author, “Name of paper,” Abbrev. Title of Periodical, vol. x, no. x, pp. xxx-xxx, Abbrev. Month, year.
J. K. Author, “Name of paper,” Abbrev. Title of Periodical, vol. x, no. x, pp. xxx-xxx, Abbrev. Month, year, doi: xxx.
M. M. Chiampi and L. L. Zilberti, “Induction of electric field in human bodies moving near MRI: An efficient BEM computational procedure,” IEEE Trans. Biomed. Eng., vol. 58, pp. 2787–2793, Oct. 2011, doi: 10.1109/TBME.2011.2158315.
J. Zhang and N. Tansu, “Optical gain and laser characteristics of InGaN quantum wells on ternary InGaN substrates,” IEEE Photon. J., vol. 5, no. 2, Apr. 2013, Art no. 2600111. 
M. M. Chiampi and L. L. Zilberti, “Induction of electric field in human bodies moving near MRI: An efficient BEM computational procedure,” IEEE Trans. Biomed. Eng., vol. 58, no. 10, pp. 2787–2793, Oct. 2011, doi: 10.1109/TBME.2011.2158315. 

After eight and more authors, “et al.” should be used after the first author’s name. Otherwise, the names of all authors should be expressed.
M. Ito et al., “Application of amorphous oxide TFT to electrophoretic display,” J. Non-Cryst. Solids, vol. 354, no. 19, pp. 2777–2782, Feb. 2008. 

Research Articles

Section default policy

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.