Determination of Nitinol Fibers Performances by Means of Embedded Systems

Authors

  • Kadir SABANCI
  • Murat KOKLU
  • Serafettin EKINCI

DOI:

https://doi.org/10.18100/ijamec.72204

Keywords:

Embedded systems, Nitinol, Shape memory alloys.

Abstract

Utilization of shape memory alloys is rapidly spreading to many technological areas. From this point, alloys with shape memory are used in various fields such as temperature sensors in electronics, test valves in medicine, radiator fans in automotive and multi leg mobile robots. Application of nitinol fibers, which are actually shape memory alloys, as muscle fibers in industrial robots are increasing day by day. In this study, several tests were carried on aiming for the operational performance of nitinol fibers that are easy to control, economic, silent and harmless to environment and that have increasing utilization in recent motion technology. By using embedded systems, contraction (spasm) ratios and electrical current passing through the fibers were measured after 0.04 and 0.06 inch nitinol fibers were subjected to various voltages. Additionally, yielding limit value of  system in the Open Source Arduino Mega electronic card.

Downloads

Download data is not yet available.

References

Dilibal S., Sönmez N., Dilibal H., “Ni-Ti Şekil Bellekli Alaşımlar ve Teknolojik Kullanım Alanları”, 3. Uluslar arası İleri Teknolojiler Sempozyumu, 2003

Dilibal S., Dilibal H., “Ituhand Robot El ve Mayın Temizleme Alanında Kullanılabilirliği”, Savunma Teknolojileri Kongresi, 2002

Dilibal S., Güner E.,Akturk N., "Three-finger SMA Robot Hand and İts Practical Analysis", Robotica, 20,175-180, 2002

Topbaş E., Akkuş N., “Şekil Hafızalı Alaşımlar ve Endüstriyel Uygulamaları”, Makine Teknolojiler Elektronik Dergisi, Cilt 4 sayfa 15-22,2007

Dilibal S.,Güner E., “Üç Parmaklı Şekil Bellek Alaşımlı(SMA) Robot Elin Yapımı ve Uygulama Analizi",Dokuz Eylül Üniversitesi Fen ve Mühendislik Dergisi,,Cilt 2,sayı 1,159-173,2000

Selimbeyoğlu E.,, "Design of shape memory alloy actuators", Ph. D. Thesis, METU Ankara,1992

Catsoulis, J., "Designing Embedded Hardware", O2Reilly, 2005, pp. 26-28

K. Prasad, V. Gupta, A. Dass, A. Verma, "Programming for Embedded Systems",2002, Wiley, pp. 15, 2.

Çakır H.Ş., Özcanhan M.H. 2011. Gömülü Sistem Uygulamalarına Yapılan Saldırılar Ve Ağ Bağlantılı Gömülü Sistemlerin Güvenliğinin Sağlanması. Elektrik-Elektronik ve Bilgisayar Sempozyumu Bildiri Kitabı 120-124. Elazığ

Topaloğlu, N., Görgünoğlu, S., "Mikroişlemciler ve Mikrodenetleyiciler", Seçkin Yayınevi, 2003, pp19-165.

Özcerit, A. T., Çakıroğlu, M., Bayılmış, C., "8051 Mikrodenetleyici Uygulamaları", Papatya Yayıncılık, 2008, pp 14-24.

Mazidi, M. A., Mazidi, J. G., McKinlay, R. D., "The 8051 Microcontroller and Embedded Systems", Prentice Hall (Peason), 2006, pp. 24-27.

Sabancı K., “Yapay Kas Kullanılarak Örümcek Robot Tasarımı”, Yüksek Lisans Tezi, Selçuk Üniversitesi Fen Bilimleri Enstitüsü,Konya,2005.

http://www.dynalloy.com/docs/TCF1140RevD.pdf

Erdal AĞYOL,Melih KUNCAN, H. Metin ERTUNÇ, Özel Şifreli, Telefon Uyarımlı Ve Android Uygulamalı Araç Güvenlik Sistemi. 8.Mekatronik Tasarım ve Modelleme Kongresi Bildiri kitabı sayfa 11-20, 20 Eylül 2013, Ankara, Türkiye

“Embedded System” Wikipedia, http://www.wikipedia.org/ wiki/Embedded_system

http://arduino.cc/en/Main/arduinoBoardMega2560

Downloads

Published

30-03-2015

Issue

Vol. 3 No. 2 (2015)

Section

Research Articles

License

Copyright (c) 2015 International Journal of Applied Methods in Electronics and Computers

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

How to Cite

[1]
“Determination of Nitinol Fibers Performances by Means of Embedded Systems”, J. Appl. Methods Electron. Comput., vol. 3, no. 2, pp. 136–138, Mar. 2015, doi: 10.18100/ijamec.72204.

Similar Articles

1-10 of 104

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

1 2 > >>