A Comparisonal Study on Unbalance Failure in the Perspective of Vibration and Electrical Consumption Analysis

Authors

  • Salih Seckin Erol

DOI:

https://doi.org/10.18100/ijamec.280502

Keywords:

electrical consumption, unbalance, resonance, vibration

Abstract

In this research, condition of resonance effect which is a common problem for mechanical constructions has been studied in perspective of unbalance failure of a bearing. A test setup designed respect to case practices; constructed and located in laboratory conditions. A bearing in the electrical motor, that is one of the elements in the test setup, has been selected for gathering data in vibration and electrical consumption during the test. The purpose of the research is testing condition of unbalance failure and resonance for studying comparison in various predictive maintenance approaches. Test has been implemented under the electricity frequency of 40.5 Hz that induced the electrical motor for determining rotational speed. According to the analysis results, inspecting of unbalance failure and resonance problem has been detected more clearly by vibration analysis.

Downloads

Download data is not yet available.

References

K.S. Jardine,, D. Lin, D. Banjevic, “A review on machinery diagnostics and prognostics”, Mechanical Systems and Signal Processing, vol. 20, pp. 1483–1510, 2006.

J. Lee, F. Wu,, W. Zhao, M. Ghaffari, L. Liao, D. Siegel, “Prognostics and health management design for rotary machinery systems—Reviews,methodology and applications”, Mechanical Systems and Signal Processing, vol. 42, pp. 314–334, 2014.

J. Lee, E. Lapira,, B. Bagheri, H. Kao, “Recent advances and trends in predictive manufacturing systems in big data environment”, Manufacturing Letters, vol. 1, pp. 38–41, 2013.

W. Deleroi, “Squirrel cage motor with broken bar in the rotor – Physical phenomena an their experimental assessment”, Proc. ICEM’82, Budapest, Hungary, 1982, pp. 767-770.

J.A. Antonino-Daviu, , M. Riera-Guasp, , M. Pineda-Sánchez, J. Pons-Llinares, R. Puche-Panader, , “Feature extraction for the prognosis of electromechanical faults in electrical machines through the DWT”, International Journal of Computational Intelligence Systems, vol. 2(2), 2012.

T. Goodenow., W. Hardman, M. Karchnak., “Acoustic emissions in broadband vibration as an indicator of bearing stress”, in: IEEE Aerospace Conference Proceedings, 2000, vol. 6, pp. 95–122.

C. Costa, M. Kashiwagi, M. H. Mathias, “Rotor failure detection of induction motors by wavelet transform and Fourier transform in non-stationary condition”, Case Studies in Mechanical Systems and Signal Processing, vol. 1, pp. 15–26, 2015.

Downloads

Published

01-12-2016

Issue

2016: Special Issue

Section

Research Articles

License

Copyright (c) 2016 International Journal of Applied Methods in Electronics and Computers

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

How to Cite

[1]
“A Comparisonal Study on Unbalance Failure in the Perspective of Vibration and Electrical Consumption Analysis”, J. Appl. Methods Electron. Comput., pp. 359–362, Dec. 2016, doi: 10.18100/ijamec.280502.