verifiedOpen Access Peer-Reviewed Scientific Journal (CC BY 4.0)
Submit Manuscript|OJS Login|Register
Peer-Reviewed Academic JournalInternational Journal of Applied Methods in Electronics and Computers
ISSN: 3023-4409DOI Prefix: 10.58190/ijamec
search
person
Research ArticlesverifiedPeer-ReviewedOpen Access
Pages: 15-19

Arduino Based System Design for Measuring Heart Rate and Body Temperature

Adnan M.A SHAKARJI fingerprint•
Adem GÖLCÜK fingerprint
Publication DateMarch 31, 2022
Volume / IssueVol. 10, No. 1 (pp. 15-19)
subject

Abstract

The aim of this study is to develop a multi-sensor and low-cost biosensor system using Arduino Uno microcontroller board. With this system, heart rate and body temperature can be measured digitally. In this way, the vital values of those with health problems will be monitored regularly, and sudden changes in vital values will be detected immediately. While developing the system, Arduino Uno control card, heart rate sensor and temperature sensor were used. In addition, a software sensitive to detecting changes in heart rate and body temperature has been developed. The system created is open to future additions and improvements. The data obtained through the sensors on the system can be easily tracked by transferring them to the computer over wi-fi. At the same time, it can be improved by placing more sensors in the system according to the purpose of use. As a result of the tests, it has been seen that the system successfully transmits the information received from the sensors to the users in the desired time and gives an audible warning at the determined critical values. Thanks to this system, vital changes in heart rate and body temperature can be accessed remotely and instantly, and it is thought that this will contribute to the field of medicine.
Keywords:ArduinoSensorBiosensorHeart RateBody Temperature.

Author Affiliations

format_list_numbered

References (7)

Cited Literature
  1. 1

    A. Karacı and M. Erdemir. Arduino ve wifi temelli çok sensörlü robot tasarımı ve denetimi. Bilişim Teknolojileri Dergisi, 2017;10(4), 435-449.

  2. 2

    W.M. Kadir, R.E. Samin, & B.S. Ibrahim “Internet controlled robotic arm.”, Proc Eng, 2012;41, 1065–1071

  3. 3

    Ö. Eriş, H. Korkmaz, K. Toker and A. Buldu. İnternet Üzerinden Hasta Takibi Amaçlı PIC Mikrodenetleyici Tabanlı Kablosuz Pals-Oksimetre Ölçme Sistemi Tasarımı ve LabVIEW Uygulaması. VII. Ulusal Tıp Bilişimi Kongresi Bildirileri, 2010;16, 16-25.

  4. 4

    W.A. Mohammad, and K.D. Choton. wireless heartbeat and Temperature Monitoring System for Remote Patients. (Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2013) H.İ. Baykoca.. “Çok kanallı biyomedikal ölçüm sistemi tasarımı”, Yüksek Lisans Tezi, Fen Bilimleri Enstitüsü

  5. 5

    M. Taştan. IoT based wearable smart health monitoring system. Celal Bayar University Journal of Science, 2018;14(3), 343-350

  6. 6

    H.D. Ekmekçi E-health kalkan ve Arduino kullanılarak çoklu fizyolojik işaretlerin bilgisayar ortamında görüntülenmesi, Yüksek Lisans Tezi, Afyon Kocatepe Üniversitesi Fen Bilimleri Enstitüsü, 2017

  7. 7

    M.A. Miah, M.H. Kabir, M.S.R. Tanveer and M.A.H. Akhand. Continuous heart rate and body temperature monitoring system using Arduino UNO and Android device. In 2015 2nd International Conference on Electrical Information and Communication Technologies (EICT) (pp. 183-188). IEEE, 2015.

format_quote

How to Cite This Article

A. M. S., A. G. (2022). Arduino Based System Design for Measuring Heart Rate and Body Temperature. International Journal of Applied Methods in Electronics and Computers, 15-19. https://doi.org/10.18100/ijamec.1029843